|
| الاسم التجاري: | YUHONG |
| رقم الطراز: | أنبوب غير ملحوم من الفولاذ المقاوم للصدأ ASTM A213 TP310S |
| الـ MOQ: | 500 كلغ |
| تفاصيل التعبئة: | علبة خشبية رقائقية / علبة حديدية / حزمة بغطاء بلاستيكي |
| شروط الدفع: | الاعتماد المستندي، تي/تي |
ASME SA213/ASTM A213 TP310S / UNS S31008 Stainless Steel Seamless Heat Exchanger Tube
ASTM A213 TP310S is the correct choice for a heat exchanger tube operating in continuous high temperatures (800°C – 1100°C) in oxidizing, carburizing, or mildly sulfidizing environments. It offers excellent oxidation resistance but limited creep strength above 900°C. Do not use it for aqueous chloride service or below 550°C if long-term embrittlement is a concern.
Choose TP310S when:
Operating temperature exceeds 850°C (1560°F) continuously.
Environment contains carbon (carburization, metal dusting risk).
Sulfur-bearing hot flue gas (sulfidation).
Polythionic acid SCC is a concern (refinery/Claus service).
High-temperature hydrogen service above 450°C.
You need oxidation resistance to 1150°C with good weldability.
Chemical Composition % of ASTM A213 TP310S Stainless Steel Seamless Tube Heat Exchanger Tube
| Grade | UNS | C | Mn | P | S | Si | Ni | Cr |
| TP310S | S31008 | 0.08max | 2max | 0.045max | 0.03max | 1.0max | 19.0–22.0 | 24.0-26.0 |
Mechanical properties of ASTM A213 TP310S Stainless Steel Seamless Tube Heat Exchanger Tube
|
Grade
|
Tensile Strength |
Yield Stress
0.2% Proof (MPa) min |
Elong
(% in 50mm) min |
Hardness
|
|
Rockwell B (HR B) max
|
||||
|
310S |
515 | 205 | 35 |
90
|
Physical Properties of ASTM A213 TP310S Stainless Steel Seamless Tube Heat Exchanger Tube
| SS | UNS | SPEC | Density Specific Gravity kg/dm³ | Modulus of Elasticity (x106 psi) |
Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) |
Thermal Conductivity (BTU-in/ft2-h-°F) |
|
310S |
S31008 |
A213/A312 |
7.98 |
29.0 |
9.2 |
116 |
Surface Finish Options
| Finish | Code | Description | Best for |
|---|---|---|---|
| Pickled (AP) | AP | Acid bath removes scale; dull gray matte | General heat exchanger service |
| Bright annealed (BA) | BA | Annealed in controlled atmosphere (H₂); shiny, oxide-free | Clean service, food/pharma, low fouling |
| Polished | MP | Mechanically polished to Ra ≤ 0.4 µm | High-purity or aesthetic |
| As-drawn | No finish | No removal of drawing lubricant or oxide | Not recommended – requires cleaning |
Application
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
التصنيف العام
لقطة تقييم
فيما يلي توزيع جميع التصنيفاتجميع المراجعات